Using The Product - Beko GN163242XBN Manual Del Usuario

Using the product

1. Wireless Key
This key is used to make a wireless connection with
your product via HomeWhiz mobile app.
When the key is pressed for a long period (3 seconds),
the wireless connection symbol on the display/screen
flashes slowly (with intervals of 0.5 seconds). The
home network is initialized on the product this way.
After achieving wireless connection with the product,
wireless connection symbol (
continuously.
When the initial connection is established, you may
activate/deactivate the connection with a short press
on this key. The wireless connection symbol shall flash
quickly (at 0.2 second intervals) until the connection
is established. When the connection is active, the
wireless network symbol shall light up continuously.
If the connection cannot be established for a long
period, check your connection settings and refer to the
"Troubleshooting" section provided in the user manual.
HomeWhiz application shall be used for wireless
connection. Installation steps are described on the
application during installation.
You may access the application by reading the QR
code available on the HomeWhiz label on the product.
Application is offered through App Store for IOS
devices, and through Play Store for Android devices.
Visit https://www.homewhiz.com/ for detailed
information.'
2. Quick Freezing Key
When the quick freeze key is pressed, the LED on the
key is illuminated and the quick freeze function shall
be activated. Freezing compartment temperature is set
to -27 Celcius. Press the key again to cancel function.
The quick freezing function shall be automatically
cancelled after 24 hours. To freeze a large amount of
fresh food, press the quick freeze key before placing
the food in the freezer compartment.
3. High temperature / error warning
This indicator ( ) shall be active when your
refrigerator cannot perform adequate cooling or in
case of any sensor error. "E" shall be displayed on
the Freezing Compartment temperature indicator and
Refrigerator / User Guide
) illuminates
15 / 29 EN
figures such as 1,2,3... shall be displayed on the
cooling compartment temperature indicator. These
figures provide information to the authorized service
on the error that has occurred.
Exclamation mark may be displayed when you load
warm food to the freezing compartment or keep the
door open for a long period of time. This is not a fault,
this warning shall be removed when the food is cooled
down or when any key is pressed.
4. Energy Saving (Display Off) Indicator
Energy saving function is enabled automatically and
the energy saving symbol (
the door of the product is not opened or closed for
some period of time. When the energy saving function
is active, all symbols on the screen other than the
energy saving symbol shall be turned off. When the
energy-saving function is active, pressing any key or
opening the door will deactivate the energy-saving
function and the display signals will return to normal.
The energy-saving function is a function activated
ex-factory and cannot be cancelled.
5. Freezing Compartment Temperature Setting
Key
Temperature setting is made for cooler compartment.
Pressing this key will enable the freezer compartment
temperature to be set at -18,-19,-20,-21,-22,-23,-
24 Celcius.
6.Cooling Compartment OFF (Vacation) Function
Key
Press the key for 3 seconds to activate the vacation
function. Vacation mode is activated and the LED
on the key is illuminated. "- -" shall be displayed on
the Cooling Compartment temperature indicator and
the cooling compartment does not actively perform
cooling. You shall not keep your food in the cooling
compartment when this function is activated. The
other compartments continue to cool according to the
set temperatures. Press the key for 3 seconds again
to cancel this function.
) is displayed when