Closed System Connection - Dovre ASTRO4GA-P Instrucciones De Instalacion Y Uso

2. Remove the cover plates (3) and (4) at the back of
the stove.
3. Install the connection collars (1) and (2) on the
back of the stove, check whether the sealing pro-
file seals completely; see next figure.
If a pipe system other than that from man-
ufacturer Muelink & Grol is used, always use
the corresponding collars and/or adapters sup-
plied by this other manufacturer.
Subject to change because of technical improvements
4. Install the cover plates (3) and (4) to the top of the
stove.
Install the smallest plate first.
5. Put the cast-iron top plate back and place the
round, separately delivered, cast-iron cover in the
opening.

Closed system connection

The concentric exhaust system allows for a series of
connection options for this appliance:
Through the facade, at any height, with or without
horizontal or oblique joint.
Through the roof, with or without horizontal or
oblique joint.
Through an existing flue gas exhaust pipe (chim-
ney)
First place the stove, see section "General pre-
paration". The concentric duct system can then be put
together in steps, starting at the stove.
9