Cleaning and other regularly
maintenance
Do not clean the appliance when it is still warm.
Clean the exterior of the appliance with a dry lint-free
cloth.
Cleaning the glass
Dirt clings less easily to well-cleaned glass. Proceed as
follows:
1. Remove dust and loose soot with a dry cloth.
2. Clean the glass with stove glass cleaner:
a. Apply stove glass cleaner to a kitchen sponge,
rub down the entire glass surface and give the
cleaning agent time to react.
b. Remove the dirt with a moist cloth or kitchen tis-
sue.
3. Clean the glass again with a normal glass cleaning
product.
4. Rub the glass clean with a dry cloth or kitchen tissue.
Do not use abrasive or aggressive products to clean
the glass.
Wear household gloves to protect your hands.
If the glass in the appliance is broken or cracked,
it must be replaced before you can use appliance
again.
Ensure that no stove glass cleaner runs between
the glass and the cast-iron door.
Use the instructions above to clean the black mir-
ror panels on the inside of the stove too.
Touching-up the paint finish
Small areas of damaged paint finish can be touched-up
with a spray can of special heat-resistant paint, available
from your supplier.
Checking the seal
Check whether the glass pane sealing rope is still in good
condition and working well. The sealing rope is subject to
wear and will need to be replaced in time.
20
Spare parts for Astro4GA(P)
Description
Remote control with thermostat
Imitation wood blocks
Glass cover seal black
Burner unit
Thermocouple
Electrode pilot
Pilot unit
Ignition cable 500 mm
Rear wall mirror panel
Side wall mirror panel
Installation plate Astro4GA
Installation plate Astro4GAP
Subject to change because of technical improvements
Part number
03.06113.000
03.31226.000
03.26433.000
02.12050.000
03.68216.000
03.23602.000
03.12011.000
03.30130.000
03.08375.000
03.08376.000
02.42026.000
02.42030.000