Pro Link Plasmex - THERMEx PRO LINK III Serie Instrucciones

68 THERMEX PRO LINK III M 536991550901122020
INSTALLING THE VALVE FOR AIR SUPPLY FROM THE OUTSIDE
The damper can be installed using direct air supply from the outside, e.g. through a roof hood or a valve in the wall.
NOTE: There may be a downdraft and draft from the air vents if the air is drawn directly from the outside when unbalanced ventilation is in
operation.

PRO LINK PLASMEX

Pro Link Plasma is the solution for modern homes where it is not possible to install the hood with an exhaust to the outside. It is often experi-
enced that the air is not sufficiently cleaned of particles in homes where it is necessary to recirculate air from the hood, as it takes a long time
before the moisture created from cooking is removed.
Thermex has therefore refined the design of Pro Link Basic so that together with the Thermex Plasma filter, it removes over 96% of the particles,
while ensuring that the ventilation system is boosted during cooking and removes moisture from the air within the shortest possible time. Pro
Link Plasma therefore, consists of Pro Link Basic and Thermex Plasma filter. The Plasma Filter is installed according to the instructions for the
Plasma Filter.
PLASMAFILTER
The instructions for the Thermex Plasma filter can be downloaded from www.thermex.dk
DANSK NORSK SVENSKA SUOMI ESPAÑOL ENGLISH
• • • • •
VEJLEDNING
Vejledning Anvisning Ohjeet
• •
Instrucciones Instructions
•