Product Overview - Toro Flex-Force Power System 31853 Manual Del Operador

4
Installing the Chute-Control
Rod
Parts needed for this procedure:
1 Chute-control rod
Procedure
1. Ensure that the chute is facing forward
7).
2. With the handle facing forward, install the
chute-control rod into the guide and push it down
until it snaps into place
1. Chute-control guide
2. Chute-control rod
(Figure
(Figure 7).
Figure 7
3. Chute-control handle

Product Overview

1. Discharge chute
2. Chute deflector
3. Chute-deflector handle
4. Battery-compartment lid
5. Chute-control rod
Specifications
Appropriate Temperature Ranges
g282249
Charge/store the battery pack
at
Use the battery pack at
Use the machine at
*Charging time will increase if you do not charge the
battery within this range.
Store the machine, battery pack, and battery charger
in an enclosed clean, dry area.
10
Figure 8
6. Headlight
7. ECO switch
8. Electric-start button
9. Bail
10. Rotor blades
5°C (41°F) to 40°C (104°F)*
-30°C (-22°F) to 49°C (120°F)*
-30°C (-22°F) to 49°C (120°F)*
g318456