Replacing The Scraper - Toro Flex-Force Power System 31853 Manual Del Operador

Maintenance
Stop the machine, remove the electric-start button,
remove the battery pack from the machine, and wait
for all movement to stop before adjusting, servicing,
cleaning, or storing the machine.

Replacing the Scraper

Service Interval: Every 20 hours
Replace the scraper blade if it is damaged or if
scraping performance is greatly reduced.
When needed, remove and replace the scraper as
shown in Figure 15.
Figure 15
Storage
Important:
Store the machine, battery pack, and
charger only in temperatures that are within the
appropriate range; refer to
10).
Important:
If you are storing the battery pack
for the off-season, charge it until 2 or 3 LED
indicators turn green on the battery. Do not store
a fully charged or fully depleted battery. When
you are ready to use the machine again, charge
the battery pack until the left indicator light turns
green on the charger or all 4 LED indicators turn
green on the battery.
•
Disconnect the product from the power supply
(i.e., remove the plug from the power supply or the
battery pack) and check for damage after use.
•
Clean all foreign material from the product.
•
Do not store the tool with the battery pack installed.
•
When not in use, store the machine, battery pack,
and battery charger out of the reach of children.
•
Keep the machine, battery pack, and battery
charger away from corrosive agents, such as
garden chemicals and de-icing salts.
•
To reduce the risk of serious personal injury, do
not store the battery pack outside or in vehicles.
•
Store the machine, battery pack, and battery
charger in an enclosed clean, dry area.
Preparing the Battery Pack
for Recycling
Important:
Upon removal, cover the terminals of
the battery pack with heavy-duty adhesive tape.
Do not attempt to destroy or disassemble the
battery pack or remove any of its components.
Contact your local municipality or your authorized Toro
distributor for more information on how to responsibly
recycle the battery.
g248009
16
Specifications (page