Honda XR250 Tornado 2017 Manual Del Propietário página 125

28
You can start the elapsed time meter before you start
off the line in an enduro.
Example:
To start the meter two minutes before the start time.
1. Press and hold the RESET-TIME button for more
than 2 seconds. The display will indicate "0 : 00 ".
2. Set the indication to "23 : 58 : 00" with the UP/
DOWN button. Pressing and holding the UP/
DOWN button will change the meter reading
continuously.
or
3. Two minutes before starting, lightly press the
RESET-TIME button for less than 1 second. The
elapsed time meter will start to count time the
instant the button is pressed.
To stop/restart counting
The elapsed time meter will be started or stopped each
time the RESET-TIME button is pressed for less than
1 second.
Elapsed time meter function will continue even
P
when the multi-function display is switched to
"CLOCK" mode or when the ignition switch is
turned OFF.
XR250 TORNADO