Major Components; (Information You Need To Operate This Motorcycle) Brakes - Honda CRF150F 2017 Manual Del Propietário

CRF150F

MAJOR COMPONENTS

(Information you need to operate this motorcycle)
Brakes
Front Brake
This motorcycle has a hydraulic front disc brake.
As the brake pads wear, brake fluid level drops.
There are no adjustments to perform, but fluid
level and pad wear must be inspected periodically.
The system must be inspected frequently to ensure
there are no fluid leaks. If the brake lever free travel
becomes excessive and the brake pads are not worn
beyond the recommended limit (page 62), there is
probably air in the brake system and it must be bled.
See your Honda dealer for this service.
Brake fluid level
With the motorcycle in an upright position, check the
fluid level. It should be above the lower level mark
(1). If the level is at or below the lower level mark,
check the brake pads for wear (page 62).
Worn pads should be replaced. If the pads are not
worn, have your brake system inspected for leaks.
The recommended brake fluid is Honda DOT 4
from a sealed container.
Do not mix different types of brake fluids, because
they are not compatible. (E.g.: DOT 4 with DOT 3).
(1)
Front brake lever
Never use adjusters other than those designed for
this motorcycle. Install a new adjuster from the lever
side with the lock nut under the head of the adjuster.
1. Pull back the rubber dust cover (1).
2. Loosen the lock nut (2).
3. To position the front brake lever (3) farther away
from the handgrip, turn the adjuster (4) clockwise.
To position the front brake lever closer to the
handgrip, turn the adjuster counterclockwise.
17
(1) Lower level mark
(Cont.)