AVer DL10 Manual Del Usuario página 20

5. After assembling the L-mount brackets, use the screws specified below (not included) to secure
the lower part of L-mount brackets onto the wall.
[Note] For cement wall: M4 x 20mm self-tapping screws (x2) + plastic conical anchor
For wooden wall: M4 x 20mm self-tapping screws (x2)
6. Pass the cables through the hole on the L-mount brackets and connect the cables to their
corresponding connection ports.
7. Use the remaining screw (1/4"-20, L=7.5mm, included in the package) to secure the camera on
the L-mount brackets.
5
7
6
10