AVer DL10 Manual Del Usuario página 43

 Factory Default: clears all values and resets the camera back to factory default values.
 Login: the default login name and password are admin/admin. To change the login name and
password, enter the new login name and password and select the "Change" button.
 Language: changes the Web UI language.
 Save to Profile: saves up to 3 different settings including preset settings values, tracking mode,
and tracking setting values of camera.
[Note] The settings of profiles will be cleared after factory reset.
 Load Profile: loads up to 3 different settings of camera. After selecting Load Profile, camera will
go back to Home position.
 Setting: You can select Import Setting Data or Export Setting Data.
[Note]
1. Importing the setting data with this procedure will overwrite all current data include camera
password, IP address, value saved in Profile, etc.
2. Camera will restart once the setting data is complete.
 Sleep Timer: sets the duration of the sleep timer. When there is no UVC connection and timer is
up, the camera will enter the sleep mode. You can select Off to disable the sleep mode.
Check the box labeled Tracking After Exiting Sleep Mode, then camera tracking will be turned
on automatically after exiting sleep mode regardless of previous tracking status.
[Note]: Before configuring the sleep mode, make sure you access Video & Audio > Video Mode
and select USB Only.
 Camera Selector: selects a camera to operate.
 Gesture Control: By default, Gesture Control is Off. Click On and raise your hand up beside your
face to show 0, 5, or 4 to control camera tracking. It is essential that the distance between you and
the camera is within 5 meters and you gesture the number right beside your face for 3 to 4
seconds. Make sure your hand is clearly distinguished from a plain background with few objects
and little furniture so that the camera can get a clear read of your hand.
Showing 0 turns off camera tracking.
Showing 5 turns on camera tracking.
33