G e t s t a r t e d
2. Get started
■ SIM card and battery installation
Keep all SIM cards out of the reach of small children. For availability and information
on using SIM card services, contact your SIM card vendor. This may be the service
provider, network operator, or another vendor. Before installing the SIM card and
removing the battery, always switch the device off, and disconnect the charger.
The SIM card and its contacts can easily be damaged by scratches or bending, so
be careful when handling, inserting, or removing the card.
Always switch off the power, and disconnect the charger and any other device
before removing the cover. Avoid touching electronic components while
changing the cover. Always store and use the device with the cover attached.
To install the SIM card, do the following:
1. Press firmly and slide the top of the back cover
to release it; then continue sliding the back
cover to remove and lift it from the phone.
2. After you have removed the back cover, insert
your finger under the battery, and lift it as shown.
3. Place a fingernail in the middle of the
metal SIM card holder. Then, unlatch and
swing the SIM card holder open.
4. Insert the SIM card into the holder as
shown, beveled corner first, with the
gold-colored contacts on the SIM card
face up (away from the phone).
5. Swing the SIM card holder closed. The
gold-colored contacts on the SIM card
meet the gold-colored contacts on the
inside of the phone. Gently press the SIM
card holder into the phone until it clicks into place.
10
2
3
4
5