Packet Data - Nokia 6125 Manual Del Usuario

Infrared
You can set up the phone to send and receive data through its infrared (IR) port. To
use an IR connection, the device with which you want to establish a connection
must be IrDA compliant. You can send or receive data to or from a compatible
phone or data device (for example, a computer) through the IR port of your phone.
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with
other IR devices. This device is a Class 1 laser product.
When sending or receiving data, ensure that the IR ports of the sending and
receiving devices are pointing at each other and that there are no obstructions
between the devices.
To activate the IR port of your phone, select
Connectivity > Infrared.
To deactivate the IR connection, select
When the phone displays
If data transfer is not started within two minutes after the activation of the IR
port, the connection is canceled and must be started again.
IR connection indicator
When is shown continuously, the IR connection is activated, and your
phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device, or a
connection has been lost.

Packet data

General packet radio service (GPRS) is a network service that allows mobile phones
to send and receive data over an Internet protocol (IP) based network. GPRS is a
data bearer that enables wireless access to data networks such as the Internet.
Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For more
information on availability of EGPRS or GPRS and data transfer speed, contact your
network operator or service provider.
The applications that may use EGPRS or GPRS are MMS, video streaming, browsing
sessions, remote SyncML, Java application downloading, and the PC dial-up.
When you have selected GPRS as a data bearer, the phone uses EGPRS instead of
GPRS, if this is available in the network. You cannot select between EGPRS and
GPRS, but for some applications you may be able to select GPRS or
(circuit switched data, CSD).
To define how to use the service, select
Packet data > Packet data connection
Menu
Menu >
Deactivate infrared?, select Yes.
Menu
and one of the following options:
> Settings >
Settings > Connectivity
> Settings > Connectivity
S e t t i n g s
> Infrared.
GSM data
>
43