Monogram ZGU364ND Instrucciones De Instalación página 14

Estufas profesionales de 36 91 cm y 48 122 cm
Ocultar thumbs Ver también para ZGU364ND:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ZXADJB30PSS, ZXADJB36PSS, ZXADJB48PSS Accessory Installation
INSTALL COVER PANELS
See alternate method if side access is blocked.
• Hold the bottom cover over the bottom support
while driving one screw (provided) into each side.
• Place the top cover with shelf over the top wall
support. If you have access to the sides, secure
the panel with two screws on each side.
• Secure the top cover with shelf to the top
support with screws through the front of the panel,
at the top corners. Use one screw on each side.
Cover Panel
Install
Screw
Install Corner Screws
INSTALL COVER PANELS (cont.)
ALTERNATE METHOD: When side access is blocked
• Install bottom cover over the bottom support while
driving one screw into each side.
• Hold top cover in place while marking screw
locations, just below shelf support and onto bottom
cover.
• Remove the shelf and drill a 9/64" diameter
hole in the pencil-marked locations.
• Mount the top cover over the top support
and secure the front cover with screws through
the drilled holes on each side.
• Install screws through each top corner.
Install
Screw
14
Mark Screw Locations
for Alternate Method
Install Screw
on Each Side
Install Screw in Top Corner on Each Side
Shelf

Publicidad

Tabla de contenido
loading

Tabla de contenido