Porsche 9Y0.915.686 Manual página 23

Option Explanation
Name Name of the power con-
sumer
Type Preset as home power con-
sumer
Mains phases Specification of the number
of phases that the power
consumer uses
Assign current Select the current sensor
sensor to a phase. that is connected on the
line to the consumer
Displaying phases of the house connection as
power consumers
Instead of listing power consumers here, the indi-
vidual phases of the house connection can also be
added. With this, consumption that is more phase-
accurate can be displayed in the Overview.
To do this, make the following settings:
1. Select Add power consumer.
2. Enter a name for the fictitious power consumer,
e.g. L1, L2 or L3.
3. Select Single-phase as the grid phase.
4. Assign the current sensor to the house connec-
tion that is measuring the corresponding phase.
Adding an EEBus device
b The EEBus devices, e.g. charger Porsche Mobile
Charger Connect, Porsche Mobile Charger Plus
and energy manager are in the same network.
b EEBus device is switched on and not in sleep
mode.
1. Select Add EEBus device.
�� Available EEBus devices are displayed. Only
those devices that are not already con-
nected to the energy manager are displayed.
2. Selecting and configuring:
The EEBus device can be identified by its identi-
fication number (SKI). The identification number
(SKI) of the Porsche Mobile Charger Connect
charger is in the charger's web application (Con-
nections e Energy manager).
Option Explanation
Name Name of the power consumer
Type Preset as EEBus device
Mains Specification of the number of supply
phases cable phases of the EEBus device
Assign Select the current sensor that is con-
current nected on the line to the EEBus device
sensor to
a phase.
e
Start the connection on the charger.
– Porsche Mobile Charger Connect charger:
Start the EEBus pairing in the web applica-
tion of the charger (Connections e Energy
manager) or on the charger itself (Settings
e Energy manager).
–
Porsche Mobile Charger Plus charger: Acti-
vate the Energy manager charging status
on the device. The device automatically at-
tempts to connect to the PLC network and
the energy manager.
For information on adding the energy manager in the
web application of the charger, see
g the instructions
at https:// www.porsche.com/international/about-
porsche/ e-performance/help-and-contact/
For other languages, select the desired country ver-
sion of the website.
g Operating instructions for the charger
Please note: Bear in mind the potential for a phase
shift of the socket to which the charger is connected.
Example:
An EEBus device is to be connected to a phase-
shifted socket that is not using Phase 1 as usual, but
Phase 2 or is multi-phase instead and does not start
with Phase 1 but with Phase 2 instead.
The current sensor that is assigned to Phase 2 is
selected as the first current sensor of a phase. With
that the current sensor on the line is assigned to the
EEBus device.
Please note: Without a mutual EEBus pairing with
a charger like the Porsche Mobile Charger Connect,
the Optimized charging function cannot be used. A
successful pairing is also indicated by the Energy
manager connected symbol (house symbol) in the
status bar of the charger.
21