Electrical Installation - SICK CQF16 Instrucciones De Uso

5
MOUNTING AND INSTALLATION
en
6

Electrical installation

18 O P E R A T I N G I N S T R U C T I O N S | CQF16
Installation possibilities
Table 5: Installation options
Figure 22: Velcro installation
position on a tank
Figure 25: Adhesive mount‐
ing
Figure 27: Flush mounting,
fig. 1
The sensors must be connected in a voltage-free state (U
tion must be observed, depending on the connection type:
– Male connector connection: Note pin assignment
– Cable: Wire color
Only apply voltage/switch on the voltage supply (U
tions have been established.
Explanations on connection diagram:
NC = normally closed
Figure 23: Bracket on thin
pipe
Figure 26: Adhesive mount‐
ing
Figure 28: Flush mounting,
fig. 2
V
> 0 V) once all electrical connec‐
V
Figure 24: Mounting with
cable ties on a pipe
Figure 29: Flush mounting,
fig. 3
= 0 V). The following informa‐
8022710.1F6T/2022-03-16 | SICK
Subject to change without notice