English
Fueling
Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
WARNING
In order to reduce the risk of fire and
personal injury from escaping gas vapor
and fumes, remove the fuel filler cap
carefully so as to allow any pressure
build-up in the tank to release slowly.
16
WARNING
After fueling, tighten fuel cap as securely
as possible by hand.
Change the fuel pick up body every year
Before storing your machine for a long
period, drain and clean the fuel tank and
run engine until carburetor is dry.
BG 56, BG 56 C, BG 66, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
Starting / Stopping the
Engine
Starting the engine
Observe safety precautions.
N
1
Press the fuel pump bulb (1) at least
N
five times – even if the bulb is filled
with fuel.
Adjusting the setting lever
BG 86, SH 86 only
To start, move the setting lever to
N
the run position F