ENGLISH
Assembly and Installation Instructions
Please read these instructions carefully before installing your gate.
WARNING:
Check the gate regularly to see if all the hardware and mountings
are tightened.
To prevent serious injury or death, securely install gate or
enclosure and use according to manufacturer's instructions.
Never use with a child able to climb over or dislodge the gate or
enclosure.
Never leave child unattended.
Use only with the locking/latching mechanism securely engaged.
The four wall mounting brackets must be used with this gate.
If not used, the gate may dislodge from the opening
and become unstable. This gate can be used in openings from
34 inches to 39 inches AND 49 inches to 59 inches. This gate
will not work with openings that have a width between
39 inches and 49 inches.
NOTE: If wall mounting your gate to a surface other than drywall or
wood, please contact a professional about installation.
Contact Carlson Pet Products for questions and replacement parts.
If in doubt about the use of your gate, call our customer care line
952-435-1084.
Carlson Pet Products.
3200 Corporate Center Drive, Suite 105
Burnsville, MN 55306-9803, USA.
Made in China
1
Check to make sure you have all of the parts shown:
A.
D.
G.
A. Maxi Gate Main Panel
B. Maxi Gate Extension Panel
C. 4 Maxi Mounting Brackets
D. 4 Maxi Threaded Rods
E. Stabilizing Foot
F. 8 - 1" Screws (requires a Phillips/crosshead screwdriver)
G. 4 Double Ended Screws (requires a Phillips/crosshead screwdriver)
H. Paper Wall Mounting Template
ENGLISH
B.
UP
E.
F.
H.
2
C.