Selecting The Correct Cuff Size; Applying The Arm Cuff - AND UA-767F Manual De Instrucciones

Selecting the Correct Cuff Size

Using the correct cuff size is important for an accurate reading. If the cuff is not
the proper size, the reading may yield an incorrect blood pressure value.
The arm size is printed on each cuff.
The index
correct cuff. (Refer to "Symbols that are printed on the cuff" on the next page)
If the index
replacement cuff.
The arm cuff is a consumable. If it becomes worn, purchase a new one.
Catalog Number
UA-290
UA-291
UA-420
Arm size: The circumference at the biceps.
Note: Model UA-767F is not designed for using a small cuff.

Applying the Arm Cuff

1. Wrap the cuff around the upper arm,
about 1-2 cm above the inside of the
elbow, as shown.
Place the cuff directly against the
skin, as clothing may cause a faint
pulse, and result in a measurement
error.
2. Constriction of the upper arm,
caused by tightly rolling up a
shirtsleeve, may prevent accurate
readings.
3. Confirm that the index
within the proper fit range.
Using the Monitor
and proper fit range, on the cuff, tell you if you are applying the
points outside of the range, contact your local dealer to purchase a
Cuff Size
Medium cuff
Large cuff
AccuFit™ Plus Cuff
points
Arm Size
9.0" - 14.6" (23 - 37 cm)
12.2" - 17.7" (31 - 45 cm)
8.6" - 16.5" (22 - 42 cm)
Do not roll up shirtsleeve tightly.
Index
English 11
Cuff
1-2 cm
Air Hose
Artery position mark
Secure the fabric
fastener firmly.
and proper fit range