Tips For Use - Cub Cadet Commercial 53RWEHRF603 Instrucciones De Funcionamiento Originales

Safety information
switching on the device. A tool located in the
rotating cutting tools area may lead to injuries.
or missing safety/protective equipment.
Safety/protective equipment are a component
of the device, are there fore your protection and
must always be functioning. You must not modify
safety/protective devices, remove them or bypass
their function. Have damaged safety/protective
devices repaired or, if necessary, replaced by a
technician or service centre.
mowing.
Check (by means of visual inspection)
Connect trailers or attachment devices
carefully. Driving performance, especially
steering, braking capability, and overall stability
are affected by attachments, towed items, ballast
weights and the weight of a grass catcher when
full.

Tips for use

Do not mow lawns which have grass blades
longer than 25 cm.
Drive carefully. Reduce your speed before
turning.
Do not use the device in potentially explosive
gases or dusts. The tool can generate sparks
which could ignite dust or vapours. Prevent
smoke.
Pay particular attention when you are mowing
or driving in reverse. To prevent accidents,
drive slowly and glance at the ground behind you
as you do so.
engine switched off and the cutting tool at a
standstill.
engine is still running.
Never drive over gravel or footpaths with the
cutters running. There is a risk of stone chips.
769-12264
Safety information
pasture grass) or over dry heaps of leaves.
Do not park the device on dry grass or leaves.
when dry grass or leaves gather on the hot
mower.
or when crossing a road. The device is not
designed for use on public roads.
Never empty the grass catcher while the
cutters are running. While emptying the grass
catcher attachment, you or other persons may be
Take extra care with opening and closing the
grass catcher; there is a risk of crushing.
When mowing close to lawn edges (e.g. close
safe distance at all times.
If the cutters come into contact with a foreign
immediately. Inspect the device for damage
before continuing operation. If necessary, take it
to a service centre.
Do not use the device without the cutters
attached. The subsequently altered weight
distribution can cause the device to tip over.
Never stand in front of the grass discharge
openings.
Switch the engine off and remove the ignition
blockages or other hindrances.
Be particularly careful when reversing with
the cutters switched on. Only reverse with the
cutter deck switched on if absolutely necessary.
Ensure that the rollover protection is locked
in a vertical/horizontal position and secure.
Never drive without rollover protection. The
rollover protection creates a safety zone, thus
protecting the user from crushing, breaks and
serious or fatal injuries if the device tips over or
falls down.
Note clearance heights before passing
suffer an impact. This can lead to serious injuries
and/or the device could tip over. The rollbar may
only be folded down for transport and storage
purposes.
The rollbar must also always be locked
in a folded down position with the bolts
and splints designed for this purpose and
secured.
The driver and/or rollbar may
EN
11