Function Table; Maintenance; Hour Service Hotline; How To Proceed If A Repair Is Necessary - Vega VEGAWAVE S 61 Manual De Instrucciones

Mode adjustment
With the mode setting (min./max.) you can
change the switching condition of the relay.
You can set the required mode according to
the "Function table" (max. - max. detection or
overflow protection, min. - min. detection or dry
run protection).
We recommend connecting according to the
idle current principle (relay contact deenergizes
when the switching point is reached), because
the relay always takes on the same (safe) state
if a failure is detected.
Control lamp
Control lamp (LED) for indication of the swit-
ching condition
•
green = relay energized
•
red = relay deenergized
•
red (flashing) = failure
5.3

Function table

The following table provides an overview of
the switching conditions depending on the set
mode and the level.
Level
Mode max.
Overflow
protection
Mode max.
Overflow
protection
Mode min.
Dry run pro-
tection
Mode min.
Dry run pro-
tection
Failure of any
the supply
voltage
(min./max.
mode)
VEGAWAVE S 61 •
Switching Control
status lamp
closed
Green
open
Red
closed
Green
open
Red
open
Level
Fault any
6

Maintenance

6.1 Maintenance
Maintenance
If the device is used properly, no special mainte-
nance is required in normal operation.
Cleaning
The cleaning helps that the type label and mar-
kings on the instrument are visible.
Take note of the following:
•
Use only cleaning agents which do not cor-
rode the housings, type label and seals
•
Use only cleaning methods corresponding
to the housing protection rating
6.2

24 hour service hotline

Should these measures not be successful,
please call in urgent cases the VEGA service
hotline under the phone no. +49 1805 858550.
The hotline is manned 7 days a week round-
the-clock. Since we offer this service worldwide,
the support is only available in the English
language. The service is free, only standard call
charges are incurred.
6.3 How to proceed if a repair is
necessary
You can find an instrument return form as
well as detailed information about the proce-
dure in the download area of our homepage:
www.vega.com.
By doing this you help us carry out the repair
quickly and without having to call back for nee-
ded information.
If a repair is necessary, please proceed as
follows:
•
Print and fill out one form per instrument
•
Clean the instrument and pack it damage-
proof
6 Maintenance
Switching Control
status lamp
open
flashes red
19