Reverse Mode - TEKONSHA PRODIGY iD Manual De Instrucciones Y Operación

When in E/H Mode the display will indicate which mode the control
is in by the size of the in the connectivity display. A full-height
indicates E/H mode.
Boost Feature
Not Engaged
Display of Connection E/H Mode
Boost Feature
Not Engaged
Disconnect Notification E/H Mode
Refer to How to Navigate the Programing Menu or EDGE
change.
Passcode Clear
This code is set through the EDGE
communication between the App and the PRODIGY iD. The Passcode
setting is located in the menu as
To clear the Passcode
The user has the option to clear the 6-digit passcode stored in the
brake controller module.
• Exit the Edge App for either Android, or iPhone.
™
• Follow the Menu navigation to Passcode Menu
Boost Feature
Engaged
Boost Feature
Engaged
App to
™
- 32 en -
App for secured Bluetooth
™
.
Flashing
.
- 34 en -

Reverse Mode

The user has the option to temporarily cancel the effects of Boost.
This might be useful during parking, especially when backing up the
trailer. The reverse mode setting is located in the menu as
To Set or Clear the Reverse Mode Setting
Refer to How to Navigate the Programing Menu or EDGE
change.
Reverse Mode will last for a period of 3 minutes, or until the user
selects the Reverse Clear
The user is notified that Reverse Mode is in effect by the Idle Mode
display showing
• With the Manual Override, select either
Needed) or
• When the passcode clear option is selected, the Display will rapidly
flash for 4 seconds.
• If the passcode was successfully cleared, the display will show
for 2 seconds then change to
• To enter new passcode, start the Edge
instructions to connect.
• If the passcode did not clear, the display will flash
2 seconds. Ensure the Edge
Refer to Edge
Flashing
• Refer to page 18en for Tekonsha Edge
option from the Menu.
or .
- 33 en -
to Clear.
.
App and follow the
™
App is closed and repeat steps.
™
App for Additional Features
™
Mobile App.
™
- 35 en -
.
App to
™
to Set, (no Action
for