Klarstein GALERAS Manual página 49

Setting the temperature
• When you press the TEMPERATURE button, the temperature initially shows
18 °C. Press the HIGHER(+) button to increase the temperature. Press the
LOWER (-) button to lower the temperature. Pressing the TEMPERATURE
button again will reset the temperature setting to the original heating function
(for example, if the setting was previously "H0", it will be reset to "H0".
• Press and hold the TEMPERATURE button for about 3 seconds to change from
Celsius (°C) to Fahrenheit (°C).
Setting the flame colour
• Press the COLOUR button on the remote control to change the flame colour.
If you press the button once, the colour changes from red to blue. If you press
the button twice, the colour changes from blue to red. If you press the button
a third time, the colour turns red again.
Setting the flame brightness
• Press the FLAME button, for dimmer mode. Each time the button is pressed,
the flame intensity decreases. The appliance has 5 brightness levels that are
scrolled through in sequence each time the button is pressed: F5 > F4 > F3 >
F2 > F1. The brightness levels are not displayed on the LED screen, only on the
appliance.
Setting the timer
• Press the Timer button. When you press the TIMER button for the first time,
"MON" flashes on the digital screen. Use the UP (+) and DOWN (-) buttons to
set the timer for the weekdays Monday to Sunday.
• When you press the SETTINGS button, "HOUR" flashes on the digital screen.
Use the UP (+) or DOWN (-) buttons to set the hours between 00:00 and 24:00.
• Press the SET button a second time to set the minutes. The minute display
flashes on the digital screen. Use the UP (+) or DOWN (-) buttons to set 00:00
- 12:00 AM to 13:00 - 24:00 PM. If you press the SETTINGS button a third time,
all timer settings are confirmed.
EN
49