Cleaning And Maintenance; Troubleshooting - Klarstein GALERAS Manual

CLEANING AND MAINTENANCE

Replace LED light bulb
The flame effect of the fireplace is created by LED bulbs. The service life of the LED
bulbs is 100,000 hours. It is recommended to have the LED bulbs replaced by a
qualified electrician. If a light bulb no longer works, contact the manufacturer, the
customer service or a specialist company.
Cleaning
• Switch off the appliance and disconnect the power cord from the wall
socket before carrying out any cleaning or maintenance work. Wait at least
10 minutes until all appliance components have cooled down.
• Use a hoover or feather duster to remove dust and dirt from the chimney and
vents.
• Clean the surfaces of the fireplace with a damp cloth or feather duster. Do not
use aggressive cleaning agents or sprays.

TROUBLESHOOTING

Problem
The appliance does not work
No flame effect
Solution
Check the fuse.
Check whether the safety shutdown
has been activated.
Have the LED light bulbs checked by a
qualified electrician.
EN
51