Securing The Cooking Grid; Installing The Fire Bowl Components - Pit Boss PB410FP Montaje Y Operación

8. SECURING THE COOKING GRID

Parts Required:
1 x Anchor Pin (#12)
Installation:
• Insert the Cooking Grid post into
the Table Panel with Hole. Note 8A.
• Secure the Cooking Grid at the
desired height using the Anchor Pin.
Note 8B.
9. INSTALLING THE FIRE BOWL
COMPONENTS
Parts Required:
1 x Lid (#5)
1 x Charcoal Pan (#7)
Installation:
• Insert the Charcoal Pan into the Fire
Bowl. Place the Lid on the top of the
Fire Bowl It will rest on the edges.
Note illustration 9A.
NOTE: To maintain the searing and
grilling performance of your Cooking
Grids, regular care and maintenance is
required.
• The unit is completely assembled.
Use the Lift Handle to raise and
lower the Cooking Grid. Use the
Swing Handle to move the Cooking
Grid side to side. Note 9B.
CAUTION: Handles can become hot
during use. If adjustment is needed,
use a heat resistant glove or mitt.
8A
8B
12
9A
9B
5
7
9