Installation Area - EAS ELECTRIC EMWY86BI Manual De Instrucciones

INSTALLATION
Installation

Installation area

Warning!
！
Stability is important to prevent the product from
wandering! Make sure the machine is standing
leveled and stable.
Make sure that the product does not stand onto
the power cord.
Make sure to maintain the minimum distances
from the walls as shown in the picture
Before installing the machine, the location
characterized as follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0°C
5.Keep far away from the heat sources such as coal or gas
burning appliances.
Unpacking the washer dryer
Warning!
！
Packaging material (e.g. Films, Styrofoam) can
be dangerous for children.
There is a risk of suffocation! Keep all
packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washer dryer and remove the base packaging. Make sure
the small triangle foam (a) is removed with the bottom packaging
together. If not, lay the unit down on the side surface and remove it
manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
11
w
w
W> 20mm
a
V.1