Overview; Device Elements; Operating Field; Colour Coding - Kärcher HDS 7/11-4 M Manual Del Usuario

Overview

Device elements

Figure 1
1 Cover
2 Support for spray lance (on both sides)
3 Steering roller with fixed position brake
4 Fastening point for transport (on both
sides)
5 Fill opening for system care Advance
RM 110/RM 111
6 Water supply set
7 High-pressure connection EASY!Lock
8 High pressure hose EASY!Lock
9 Spray lance EASY!Lock
10 High-pressure nozzle (stainless steel)
11 Steam nozzle (brass)
12 Power supply
13 Safety lever
14 Folding compartment
15 Trigger
16 Safety latch of the hand spray gun
17 Trigger gun EASY!Force
18 Pressure/ quantity regulation at the
hand spray gun
(depending on model)
19 Connection for water supply with filter
20 Step depression
21 Pouring vent for detergent 2
22 Pouring vent for detergent 1
23 Pouring vent for fuel
24 Handle

25 Operating field

26 Closing flap for storage compartment
27 Storage compartment for accessories
28 Nameplate
29 Cover lock
30 Oil tank
31 Pressure/quantity regulation of the
pump unit
32 Oil drain screw
33 Backflow valve of the detergent infeed
34 Detergent suction hose 1 with filter
35 Detergent suction hose 2 with filter
36 Fuel filter
37 Service switch
38 Water shortage safe guard with sieve
39 Float tank
40 Fine filter (water)
Figure 2
A Power switch
B Temperature controller
C Dosage valve for detergent
D Manometer
1 Indicator lamp pump
2 Indicator lamp rotation direction
(not HDS 7/11, HDS 7/12)
3 "Ready for use" indicator lamp
4 Fuel indicator lamp
5 Indicator lamp: Detergent 1
(HDS 12/18 only)
6 Engine indicator lamp
7 Indicator lamp burner failure
8 Indicator lamp service
9 Indicator lamp system care
10 Indicator lamp: Detergent 2
(HDS 12/18 only)
– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.

Symbols on the machine

High-pressure jets can be dan-
gerous if improperly used. The
jet may not be directed at persons, animals,
live electrical equipment or at the appliance
itself.
Risk of electric shock!
Only electricians or authorised
technicians are permitted to
work on parts of the plant.
Risk of burns on account of hot
surfaces!
Risk of poisoning! Do not inhale
exhaust fumes.
EN – 2
Operating field

Colour coding

25