Denon AVR-1804 Instrucciones De Operación página 25

DTS NEO:6 mode
1 2 4, 6 5, 7
1
Select the function to which the component
you want to play is connected.
Example: DVD
(Main unit) (Remote control unit)
2
Select the DTS NEO:6 mode.
(Main unit) (Remote control unit)
• The mode switches as shown below each
time the button is pressed.
DOLBY PL II DTS NEO:6
3
Play a program source.
4
Select the surround parameter mode.
Display
MODE cinema
(Main unit) (Remote control unit)
To perform this operation from the remote
control unit, check that the mode selector
switch is set to "AUDIO".
The DTS NEO:6 Cinema or
Music mode can be chosen
2
directly by pressing the
CINEMA or MUSIC button
on the remote control unit
1
during playback in the DTS
NEO:6 mode.
6
4, 6
9
5, 7 5, 7
6
5
Select the optimum mode for the source.
(Main unit) (Remote control unit)
MODE cinema MODE music
or or
6
Select the various parameters.
(Main unit) (Remote control unit)
7
Set the various surround parameters.
(Main unit) (Remote control unit)
8
When the surround parameters are set using
the buttons on the main unit, stop operating
buttons after completing the settings. The
settings are automatically finalized and the
normal display reappears after several seconds.
Surround parameters q
II
Pro Logic Mode:
• The Cinema mode is for use with stereo television shows and all programs encoded Dolby Surround.
• The Music mode is recommended as the standard mode for autosound music systems (no video), and is
optional for A/V systems.
• The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source
contents is not of optimum quality.
Select one of the modes ("cinema", "music" or "Pro Logic").
Panorama Control:
This mode extends the front stereo image to include the surround speakers for an exciting "wraparound"
effect with side wall imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either towards the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only from the center speaker; only from the left/right
speakers as a phantom image; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
DTS NEO:6 Mode:
• Cinema
This mode is optimum for playing movies.
performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources.
This mode is effective for playing sources recorded in conventional surround formats as well, because the
in-phase component is assigned mainly to the center channel (C) and the reversed phase component to the
surround (SL, SR and SB channels).
• Music
This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder
and are played directly so there is no loss of sound quality, and the effect of the surround signals output
from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound
field.
CENTER IMAGE (0.0 to 0.5: default 0.2):
The center image parameter for adjusting the expansion of the center channel in the DTS NEO:6 MUSIC
mode has been added.
9
Press the ENTER button to
finish surround parameter
mode.
(Remote control unit)
Decoding is performed with emphasis on separation
ENGLISH
25