• Setting the locomotive parameters (address, acce-
leration/braking delay, maximum speed): with the
Control Unit, Mobile Station, Central Station.
• Headlights, changing over with the direction of
travel.
It is not necessary to open the locomotive for mainte-
nance work. Disassembling the locomotive automati-
cally invalidates the manufacturer warranty.
In principle the pulling power for this model is limited.
The maximum grade it can negotiate with 2 to 3
twoaxle freight cars is about 3 %.
The maintenance work necessary with normal
operation of this locomotive is described below.
Please see your authorized Märklin dealer for repairs
or spare parts.
No warranty or damage claims shall be accepted in those cases
where parts neither manufactured nor approved by Märklin have
been installed in Märklin products or where Märklin products have
been converted in such a way that the non-Märklin parts or the
conversion were causal to the defects and/or damage arising. The
burden of presenting evidence and the burden of proof thereof,
that the installation of non-Märklin parts or the conversion in or
of Märklin products was not causal to the defects and/or damage
arising, is borne by the person and/or company responsible for the
installation and/or conversion, or by the customer.
All manuals and user guides at all-guides.com
Safety Warnings
• This locomotive is to be used only with an operating
• This locomotive must never be supplied with power
• Pay close attention to the safety warnings in the
Fonction
• Systèmes d'exploitation possibles:
• Détection du mode d'exploitation: automatique.
• Adresses disponibles: 01 – 80
• Temporisation d'accélération et de freinage réglable
• Réglage des paramètres de la loco (adresse,
• Feux de signalisation avec inversion selon sens de
system designed for it (Märklin 6646/6647 AC
transformer, Märklin Delta, Märklin Digital or Märklin
Systems).
from more than one transformer.
instructions for your operating system.
Märklin Transformer 6647, Märklin Delta,
Märklin Digital, Märklin Systems.
Adresse encodée en usine: 23
(les 2 simultanément). Vitesse maximale réglable.
temporisation accélér.-freinage, vitesse maximale):
via Control Unit, Mobile Station ou Central Station.
marche.
5