Control Panel; Temperature Setting Buttons - AEG SANTO Instrucciones De Servicio

Ofrecido por www.electromanuales.com
Appliance Description

Control Panel

1 ON/OFF button and ON/OFF indicator light (green)
2 Temperature display for refrigerator (not for LONGFRESH 0 °C
cold zone)
3 Temperature setting buttons for refrigerator
4 COOLMATIC button and COOLMATIC indicator light (yellow)
• COOLMATIC for intensive cooling in the refrigerator
5 FROSTMATIC button and FROSTMATIC indicator light (yellow)
• FROSTMATIC for fast freezing in the freezer compartment
6 Temperature display for freezer compartment
7 Temperature setting buttons for freezer compartment
8 ALARM OFF button and warning indicator light (red)
(see section: "Control and Information Systems")

Temperature setting buttons

These buttons are connected to the temperature display.
• The temperature display is switched over from the display of the
ACTUAL temperature (Temperature display is illuminated) to the dis-
play of the DESIRED temperature (Temperature display flashes) by
pressing one of the two buttons, „+" (WARMER) or „-" (COLDER).
• Each time one of the two buttons is pressed again the DESIRED tem-
perature is adjusted by 1 °C.
• If neither button is pressed, the temperature display automatically
switches back after a short period (approx. 5 sec.) to the display of
the ACTUAL temperature.
DESIRED temperature means:
The temperature that has been selected for inside the fridge or the
freezer compartment. The DESIRED temperature is indicated by flashing
numbers.
20
The temperature is adjusted using the
„+" (WARMER) and „-" (COLDER) buttons.
818 41 56-00/1