How The Cooktop Extractor Works; How The Induction Cooktop Works; Operating The Hob With The Sensor Keys; Worth Knowing About The Slider - FRECAN FLOW 53 Manual De Instalación Y De Usuario

3.3 How the cooktop extractor works

Depending on the model you purchased, the cooktop
extractor can be operated as an exhaust air or a
recirculating air version.
Exhaust air mode
The air suctioned away is purified by the grease filter
and expelled into the open air via a duct system. The
exhaust air must not be expelled into:

a smoke or exhaust gas flue that is in operation

a shaft used for the aeration of rooms where
fireplaces are installed.
If the exhaust air is to be directed into a smoke or
exhaust gas flue that is not in use, the installation must
be checked and approved by the responsible heating
engineer.

3.4 How the induction cooktop works

3.4.1 Operating the hob with the sensor keys

The glass ceramic hob is operated with touch control
sensor keys. The sensor keys are operated as follows:
lightly touch a symbol on the surface of the ceramic
glass plate. A buzzer will indicate when the controls
have been operated correctly.
The touch control sensor key will then be indicated as
"key".
ON / OFF key (hob) (6)
This key is used to switch the entire hob on and off.
Cooking zone power setting display (8-9-10-12)
The power-setting indicator shows the power setting
which has been selected, or:
...................Residual heat
...................Power boost
...................Pan recognition
...................Heat up automatic
...................Pause function
....................Childproof lock
...................Bridging function
...................Keep warm level
...................Grill function
...................Error message
Appliance description
Fan power setting display (11)
The power setting display shows the power setting for
Lock key
The lock key can be used to lock all of the keys.
Keep warm key
To keep warm.
Power boost in the sensor field
The power boost setting makes additional power
available for induction cooking zones.
Pause key
The Pause function can be used to briefly stop the
cooking process.
Recall function
The most recent setting can be recovered if the hob is
switched off unintentionally.
Grill key
Grill function with a griddle plate for induction.
3.4.2 Worth knowing about the slider (sensor field)
In principle, the slider functions the same as the touch
controls; the only difference is that you can put your
finger on the glass ceramic surface and then move it
around. The sensor field recognises this movement and
raises or lowers the display setting (power level) in
accordance with the movement.
The term sensor field is used to mean slider from now
on.
What must be observed when operating sensor
fields?
Your finger should not be placed flat onto the glass
ceramic surface in order to avoid adjacent keys/sensor
fields from reacting by mistake.
the fan which has been selected, or:
.............Automatic fan
..............Filter state indication
..............Error message
(14)
(15)
(13)
(13) (recovery function)
(16)
1 2 3 4 5 6 7 8 9 P
Sensor field
EN
9