Electrical Connection - FRECAN FLOW 53 Manual De Instalación Y De Usuario

Installation

4.9 Electrical connection


Observe all safety and warning information (see the
"Safety" chapter).

Observe all national and regional laws and
regulations
regulations of the local utility companies.

The power connection may only be established by
certified specialists. The specialist also assumes
responsibility
commissioning.

Connections via plug-in contacts (Schuko plugs)
are not permitted.
Position of the terminal box in the appliance:

Switch off the main switch/automatic circuit breaker
before connecting the cooktop.

Secure the main switch/automatic circuit breaker
against being switched back on without permission.

Make sure
disconnected.

The hob has been fitted with a temperature-resistant

connection cable in the factory.

If the mains cable is damaged, it will need to be
replaced with a new one. In order to avoid any risks,
this must be carried out by certified specialist.
as well as the supplementary
for the proper installation
the power to the
EN
and
appliance is
17