Base Installation With Latch - Hauck PROsafe 35 Instrucciones De Manejo

LEVELLING THE BASE
STEP 1: Place the base rear-facing on the
vehicle seat so the rear of the base is contacting
the vehicle seat back.
STEP 2: If the vehicle seat back is adjustable,
adjust the seat back into the upright position
or the position specified in the vehicle owner's
manual.
STEP 3: Adjust the Recline Adjustment Foot
into the extended position. Open the vehicle belt
lock off by rotating the lower lock off lever down
(1), rotate the upper lock off lever up into the
open position (2), lift the back of the base and
push out the upper lock off lever to unlock the
recline adjustment foot (3), and allow the recline
adjustment foot to move down into the extended
position (4).
s that face
e vehicle
All manuals and user guides at all-guides.com

BASE INSTALLATION WITH LATCH

WARNING
• Latch belt must be tightly adjusted and
stay tightly adjusted around base.
• Proper seat back recline is required:
- Too upright can cause breathing difficulty.
- Too reclined can cause ejection in a crash.
EN
EN 29