Base Installation With Vehicle Seat Belt - Hauck PROsafe 35 Instrucciones De Manejo

EN

BASE INSTALLATION WITH VEHICLE SEAT BELT

WARNING
• Vehicle seat belts must be tightly adjusted
and stay tightly adjusted around base.
• Inflatable seat belts are NOT compatible
with this child restraint.
• Proper seat back recline is required:
- Too upright can cause breathing difficulty.
- Too reclined can cause ejection in a crash.
LEVELLING THE BASE
STEP 1: Check that the LATCH belt and
connectors are properly stored in the Instruction
Manual/LATCH Storage Compartment.
STEP 2: Place the base rear-facing on the
vehicle seat so the rear of the base is contacting
the vehicle seat back.
STEP 3: If the vehicle seat back is adjustable,
adjust the seat back into the upright position
or the position specified in the vehicle owner's
manual.
36 EN
All manuals and user guides at all-guides.com