Adjusting The Coffee Mill - EAS ELECTRIC ECOFFE45 Manual De Instrucciones

and put it back to original position for the coffee maker to
go back for "READY" state.
Important! when removing the drip tray, the ground
container must be emptied, even if it is not completely full.
If this is not done, when you make the next coffee, the
ground container may fill up more than expected and clog
the machine.
NOTE 8: Never extract the water tank while the machine is
delivering coffee. If it is removed, it will not be possible to
make the coffee and the appliance will display "FILL
WATER". Put the water tank in original position for the
interrupted program to go on until completion.

ADJUSTING THE COFFEE MILL

The coffee mill is preset in the factory to make coffee
correctly and should not require further adjusting initially.
However, if after making the first few coffees you find that
delivery is either too fast or too slow (a drop at a time), this
can be corrected by adjusting the grinding adjustment
knob (A6).
Important! The grinding adjustment knob (A6) must
only be turned when the coffee mill is in operation. For
slower delivery and creamier coffee, turn one click anti-
clockwise (finer pre-ground coffee).
For faster delivery (not a drop at a
time), turn one click clockwise
(coarser pre-ground coffee).
(Coffee has been used to factory
A6
test the appliance and it is there-
fore completely normal for there
to be traces of coffee in the mill.)
17 V.1