Electrical Connection - EAS ELECTRIC ECOFFE45 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ELECTRICAL CONNECTION

A) If your appliance comes fitted with a plug, it will
incorporate a 13 Amp fuse. lf it does not fit your socket, the
plug should be cut off from the mains lead, and an
appropriate plug fitted by a qualified electrician, as below.
WARNING: Very carefully dispose of the cut off plug after
removing the fuse: do not insert in a 13 Amp socket elsewhere
in the house as this could cause a shock hazard. With
alternative plugs not incorporating a fuse, the circuit must be
protected by a 15 Amp fuse. In the event of losing the fuse
cover, the plug must NOT be used until a replacement
fuse cover can be obtained from your nearest electrical
dealer. The colour of the correct replacement fuse cover is
that as marked on the base of the plug.
B) If your appliance's not fitted with a plug, please follow the
instructions provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
If the color of the wires in the mains lead do not correspond
with the coloured markings identifying the terminals in your
plug, proceed as follows:
The green and yellow wire must be connected to the terminal
in the plug marked with the letter E or the earth symbol or
coloured green or green and yellow.
The
blue
wire
marked with the letter N or coloured black.
must
be
connected
32
to
the
terminal
V.1

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido