Troubleshooting - EAS ELECTRIC ECOFFE45 Manual De Instrucciones

The brown wire must be connected to the terminal marked
with the letter L or coloured red.

TROUBLESHOOTING

DISPLAYED
MESSAGE
The water tank is empty
Fill water
or positioned incorrectly
The grinding is too fine
Fault 3
and the coffee is
delivered too slowly
The machine cannot
make coffee; there is air
in the hydraulic circuit.
EMPTY
GROUNDS
Tray not inserted or
Tray
not in right position
Missing
Fill powder
The "pre-ground
coffee" function has
been selected without
placing any pre-
ground coffee in the
funnel
The funnel (A14) is
blocked
Decalcify The machine must be
ready descaled
POSSIBLE CAUSE
The total number of
of coffee made has
reached 15
Fill the tank with water and/or
insert it correctly, pushing it as
far as it will go
Turn the grinding adjustment
knob one click clockwise
towards big symbol
Running "self check"
Program and can repair
the machine
Extract the drip tray and empty
the grounds container and
clean. then put to original
position.
Important: when removing the
drip tray the grounds container
MUST be emptied, even if it is
not completely full.
Put the tray to original position
Extract the appliance and
place pre-ground coffee in
the funnel using the
spoon
Empty the funnel with the
help of a knife as described in
the section "Cleaning the pre-
ground coffee funnel'
The descaling procedure
described in the "Descaling"
section needs to be
performed as soon as possible.
33
REMEDY
V.1