Preventing Material Damage; For The Safety Of Your Child; Before Using For The First Time - Silvercrest SPB 800 A1 Manual

All manuals and user guides at all-guides.com
RP75469 Pizzabäcker LB5 Seite 43 Freitag, 27. Juli 2012 12:49 12
• Never use the appliance near curtains
and other flammable materials. If the
food to be cooked catches fire, the
flames could easily spread to other
objects.

4.6 For the safety of your child

Warning! Children are often
unaware of danger and are injured
as a result. Please note therefore:
• Only allow children to use this appliance
under the supervision of an adult.
• Ensure the appliance is always kept out
of the reach of children.
• Ensure that children cannot pull the
appliance down onto themselves with
the cable.

5. Before using for the first time

During manufacture, many parts are given a
thin film of protective oil. Before using the
appliance for the first time, heat it up without
pizzas so that any residues can evaporate.
Note: When heating up for the first few
times a slight smell may be produced. Make
sure the room is adequately ventilated.
1. Take the appliance and all the
accessory parts out of the packaging.
2. Check that the appliance shows no signs
of damage.
3. Clean the appliance before using it for
the first time. Observe the information in
the chapter entitled "Operation" on
page 44.
4. Select a location that is firm, level and
not flammable. Maintain a distance of
approx. 50 cm from other objects.
SPB 800 A1
• Ensure that the packing foil does not
become a deadly trap for a child.
Packing foils are not toys.

4.7 Preventing material damage

Caution! To avoid damaging
appliance, please note:
• The terracotta lid 2 must not come into
contact with water or be placed on a
cold surface when it is hot. The
temperature shock could lead to cracks.
• The terracotta lid 2 is fragile and
sensitive to impact. Therefore, handle it
with care and store it in its original box if
possible.
• If the appliance is to stored for a long
period after cleaning, lightly oil the
baking plate 7 to prevent the build-up of
rust.
5. Place the lid 2 on the bottom section 1
so that the vertical heating elements are
hidden.
6. Insert the mains plug into a suitable
mains socket (see "3. Technical data"
on page 40).
The indicator light 4 lights up, and the
appliance starts to heat up.
7. After about 20 minutes,
appliance off again by pulling out the
mains plug and let the appliance cool
down.
8. Clean the appliance again. Take note of
the relevant information in the section
entitled "6. Operation" on page 44.
The appliance is now ready to use.
the
turn the
43