Menu Options; Menu Selections; Recall Of Stored Data; Transmitting Stored Data - Tintometer Lovibond MD100 Instrucciones

Menu options

GB

Menu selections

Mode
Press the [MODE] key and hold.
Switch the unit on using the [ON/OFF] key.
On
Allow the 3 decimal points to be displayed before releasing the
Off
[MODE] key.
!
The [!] key allows for selection of the following menu points:
1
Store Date
Print Time
1
2
1
Cal
2 3
Cal
Store Date
Print Time
diS
1
After confirming the selection with the [MODE] key the photometer
shows the last 16 data sets in the following format (automatically
Mode
proceeds every 3 seconds until result is displayed):
Number
Year
Date
Time
Test
Result
Zero
Test The [ZERO/TEST] key repeats the current data set.
Mode
The [MODE] key scrolls through all stored data sets.
!
Quit the menu by pressing [!] key.
Store Date
Print Time
Prt
1
Note: To print data, or to transmit to a PC, the optional IRiM (Infrared
Interface Module) is required.
The IRiM Module and the connected printer/PC must be ready. Press
the [MODE] key to start the transmitting, the instrument displays
"PrtG" (Printing) for approx. 1 second followed by the number of
the first data set and its transmission. All data sets will be transmit-
ted one after the other. After finishing the instrument switches to
PrtG
test mode.
The print job can be cancelled by pressing the [On/Off] key. The
On
instrument switches off.
Off
30
All manuals and user guides at all-guides.com
diS recall stored data
Prt printing stored data
setting the date and time
user calibration
diS – Recall of stored data
1
n xx (xx: 16...1)
YYYY (e.g. 2014)
mm.dd (monthmonth:dayday)
hh:mm (hourhour:minuteminute)
Method
x,xx
Prt – Transmitting stored data (to Printer or PC)
1
MD100_4 10/2014