Instructions For The Installer - Mepamsa COMPACT-405 Manual De Instrucciones

All manuals and user guides at all-guides.com

Instructions for the installer

Important
The oven must be installed by qualified authorised personnel in compliance
with current regulations.
Installation must be performed by specialist authorised persons only.
Characteristics of the unit
The components of the unit in which the oven is fitted (plastic and veneered
wood) must be secured with suitable adhesive able to withstand the heat
(max 150°C); inadequate materials and adhesives can warp or come unstuck.
The unit must permit free passage of the electrical connections and must be
solid enough to withstand the weight of the appliance.
The oven must be slotted securely into the recess provided. The oven can be
fitted inside a column unit or below the top of a modular unit if the latter
guarantees adequate ventilation. If the oven is fitted in a column unit, rear
ventilation ducts are necessary with diameter 55 mm throughout the width of
the unit in order to protect the appliance and the unit in the long term and
improve performance. To facilitate connection of the appliance to the mains
and help improve ventilation, you are advised not to fit the back panel.
30