Polarized Plug Instructions; Short Cord Instructions - Kalorik FT 26175 Manual De Instrucciones

All manuals and user guides at all-guides.com
Fax +1 305 430 9692
17. Always attach the magnetic plug to appliance first, and then plug
cord in the wall outlet. To disconnect, turn control to "Off" and
remove plug from wall outlet.
18. Do not use appliance for other than intended use.
19. Be sure the handle is properly assembled to basket and locked in
place. See detailed assembly instructions shown in this manual.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY

POLARIZED PLUG INSTRUCTIONS

This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug will fit into the polarized
outlet only one way. If the plug does not properly fit into the outlet at
first, reverse it. If it still does not fit, contact a competent qualified
electrician. Do not attempt to modify the plug in any way.

SHORT CORD INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting
•
from becoming entangled in, or tripping over a longer cord.
Do not use the appliance with an extension cord.
•
Do not operate any appliance with a damaged cord or plug or
•
after the appliance malfunctions or has been damaged in any
manner.
Your fryer is equipped with a breakaway magnetic cord. The
•
magnetic plug will only attach to the appliance in one direction. The
plug is designed so that the notches are on the bottom side, which
will help you into attaching the plug the right way. The magnets on
the plug automatically make the connection. Should you
accidentally bump or trip into the cord, it will then automatically
detach, break the connection and avoid the spilling of hot oil. Do
NOT place the appliance on top of the cord, or run the cord around
the unit, as it would prevent the cord from detaching easily.
Copies of the I/B. Please reproduce them without any
changes except under special
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
3
Back cover page (last page)
Assembly page 3/32
instruction from Team
Print only