Lamp Hours; Brightness Control; Standby; Menu - Sunoptic Surgical Titan X350 Manual Del Operador

6.2.2 Normal Operating Screens
6.2.2.1

Lamp Hours

Depicted on the top line of the main display.
6.2.2.2

Brightness Control

Brightness may be adjusted by touching the
display.
NOTE: The brightness controls operate a progressive mechanical shutter. The lamp is running at full
power regardless of the brightness leve.
6.2.2.3

Standby

Touching the
STANDBY will flash on the screen in one second intervals. Touching the
icon again, will restore the illuminator to the previous brightness setting.
6.2.2.4

Menu

Touching the
MENU functions. Keep pressing the

6.2.2.4.1 Reset Filter

It is advised to replace the dust and particulate filter every 250 hours. After the filter
is changed, press the
message from the home screen.
LIT-218 Sunoptic Surgical
Rev. F
icon fully dims the output of the illuminator. The word
icon will cycle the touchscreen through five additional
®
Page 14 of 146
or
icon to return to the home screen.
to remove the Change Filter and Reset
icons on the main
(English)