Eiko SCRG Instrucciones De Instalación página 5

REMOTE SETTINGS (optional):
EiKO Global, LLC • 23220 W. 84th St, Shawnee, KS 66227 • (P) 1-800-852-2217 • (F) 1-800-492-8975 • eiko.com
EiKO Canada • 81 King St, Barrie, Ontario L4N 6B5 • (P) 1-705-721-5189 • (F) 1-705-721-7855 • orderdesk@eiko.com
Rev. 1/4/18
Uploads the settings. (Must hold for 5 seconds to permanently
Transmit
program settings*).
Dectection Area 25%/50%/75%/100%
The timeout from 100% to dim
Hold Time
8S/1min/5min/15min/30min
Daylight Threshold 5Lux/15Lux/50Lux/150Lux/Disable
The timeout from dim to off
Stand-by Period
0S/1min/5min/30min/+∞
Stand-by DIM level 10%/20%/30%/40%/50%
A. Movement detect 9.8ft~19.7ft/3-6m
B. Presense dectect 9.8ft~19.7ft/3-6m
Auto Mode C. Presense detect with daylight harvesting: 9.8ft~19.7ft/3-6m
D. High mounting: 19.7ft~49.2ft/6-15m
E. High mounting with daylight harvesting: 19.7ft~49.2ft/6-15m
ON/OFF Permanent ON/OFF
Press "Reset" button for factory testing purpose only
Detection
Reset
Ambient Threshold Press this button to set the current suitable daylight threshold
Dim+/Dim- Adjust the light level when motion detected
1/2/3/4 4 optional quick settings
* Pressing and holding the "Transmit" key for 5 seconds helps ensure that the sensor will retain settings after power
disruptions. Failure to program the sensor in this fashion may result in the sensor reverting to the dip switch settings after
power is restored. When power is restored, sensor may be reprogrammed with the remote commissioning tool.
Hold Time
Area
100% 1min
Daylight Stand-by
Sensor Period
Disable 3min
Stand-by
Dim Level
20%