Installing The Child Seat - Silver Cross Balance Manual Del Usuario

All manuals and user guides at all-guides.com

1. INSTALLING THE CHILD SEAT

INSTALLATION FROM 9 TO 18 KG:
1.1 Slide the ISOFIX connector arms B (5) to
their maximum length by turning the ISOFIX
connector arms extension lever A (16).
Do this on both sides of the seat.
Extend the top tether and place (4) on top
of the seat.
1.2 Connect the ISOFIX connector arms
until you hear them click into place.
The ISOFIX connection indicator (17) will
turn from red to green. Push the seat as
far back as possible. Make sure that both
lSOFIX are in the same position once you
have pushed the seat back.
1.3
Connect the Top Tether in the anchor
point in the vehicle marked with the symbol:
The connector may be closed without being
secured in the ISOFIX anchor. Please make
sure that the connectors are correctly
fastened into the anchor points of the
vehicle by pulling the seat once it has
been installed.
To detach the seat follow the same steps
in reverse.
Move the button(15) to open the connector
and release the anchors.
INSTALLATION FROM 15 TO 36 KG:
Follow the same steps as before. In this case
you should not connect the Top Tether.
There is also the option of installing the seat
only with the car seat belt when using the
15-36kg mode however where possible it is
recommended to use ISOFIX.
silvercrossbaby.com
ENG
FRA
SPA
ITA
DEU
SWE
FIN
RUS
ZH-S
ZH-T
ARA
11