Turning On Your Monitor - Angelcare AC510 Manual De Usuario

2
Note: Each time you power ON your Camera, the internal thermometer will need to
calibrate to ensure accuracy. This automatic process will take approximately 30 minutes.
The colour changing temperature display, by default, will be turned "OFF". You may turn
this feature "ON" in the settings mode on your Parent Unit.
CAMERA
Front Side
STEP 3 ‑ TURNING ON YOUR MONITOR
3.1 TURNING ON YOUR CAMERA
ON
OFF
1
3.2 TURNING ON YOUR PARENT UNIT
Your Camera and Parent Unit come pre‑paired.
1
When Parent Unit is turned ON and Camera is OFF, Parent Unit will display
Out‑of‑Range icon.
All manuals and user guides at all-guides.com
1) Place the Camera at a minimum of
2) Connect the adapter to the Camera
Pairing button
Speaker
Microphone
Camera
Room
temperature
display
Micro USB
charging port
1) Slide the Camera ON/OFF switch to the ON position.
1) Press and hold the Parent Unit ON/OFF button for
2 seconds until LCD screen is turned ON. Angelcare's
logo will be shown for 1 second.
1 metre away from the cot.
and into an electrical outlet.
POWER ON/OFF
Rear Side
The Camera connection signal
strength icon will appear in the
status bar.
E
N
Magnet for
tabletop stand
and wall mount
53