Error Messages/Troubleshooting; Cleaning And Maintenance - Beurer medical BC 40 Manual De Instrucciones

Displaying individual measurements
• When the memory button M is pressed again,
the last individual measurement is displayed.
• When the memory button M is pressed again,
you can view your individual measurements.
• To switch the device off again, press the
START/STOP button
You can exit the menu at any time by pressing the
START/STOP button
Deleting measurements
Deleting individual measurements
• Start individual measurement access.
• Press and hold the memory button M for approx. 5 sec-
onds. The relevant measurement is deleted.
• The display starts to flash, then an empty display with
empty user memory frame is displayed. Press the mem-
ory button M to delete additional values or press the
START/STOP button
Deleting all measurements
• Start access to average value of all saved measurements
by pressing the memory button M twice.
• Press and hold the memory button M for approx. 5 sec-
onds. All measurements are deleted.
All manuals and user guides at all-guides.com
.
.
to switch off the device.
• The display starts to flash, then an empty display with
empty user memory frame is displayed. Press the mem-
ory button M to delete additional values or press the
START/STOP button

7. Error messages/troubleshooting

In the event of errors, the error message
the display.
Error messages may appear if:
• you move or speak during the measurement (
on the display)
• the cuff is placed on the arm too tightly or loosely or if the
cuff is damaged (
• the pump pressure is higher than 290 mmHg (
appears on the display)
• the batteries are almost worn out (
In such cases, repeat the measurement. If necessary, rein-
sert or replace the batteries.

8. Cleaning and maintenance

• Clean your blood pressure monitor carefully using a
slightly damp cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances should you hold the unit under
water, as this can cause liquid to enter and damage the unit.
• Never place any heavy objects on the device.
24
to switch off the device.
_ appears on
appears on the display)
and ).
appears