Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Tray
The transparent insert is not removable.
• To use the tray's swing arm, release one arm of the tray (either side) by squeezing the release
button and rotating the tray upward. (45)
Storage Basket
• The storage basket should not be removed.
I WARNING:
the storage basket is 25 lbs. (11.3 kg). Excessive weight may result in a
hazardous unstable condition.
Folding the Stroller
• Keep children away from the stroller while folding.
• Make sure the front wheels are in swivel mode. (46)
• Adjust the front seat to the most upright position.
• Make sure the rear wheel brakes are set to their locked positions. (47)
• Close the canopy and move it all the way forward.
• Under the center of the handlebar, flip open the release button, squeeze the button into the
handlebar and push the handle fully forward. (48)
CAUTION: While folding the stroller, be careful to keep your fingers from being pinched by moving
parts.
• The locking latch on the right side of the stroller should automatically engage. If it is not engaged,
gently push the stroller together until you hear an audible click. (49)
• Ensure that the stroller is locked by pulling up on the handlebar.
I WARNING:
keep children away from the stroller when folding. Possible pinching
hazard – Be careful when folding the stroller.
Removing/Reinstalling the Front Seat Fabric
NOTE: The front seat fabric is removable for washing.
• Remove the front seat from the stroller. Refer to section "Removing/Reinstalling the Front Seat."
• Unzip the fabric on the seatback. (50)
• Release the Velcro® at the bottom of the seatback. (51)
• Locate the two supporting straps wrapped around the base of the seatback side frame bars.
• Remove one strap by sliding it through the rectangular metal ring. (52)
• Repeat on the other side.
• Remove the seat fabric from the frame. (53)
• Remove both shoulder straps, both waist straps and the crotch strap by turning the plastic ends
sideways and pushing them completely through the slots in the plastic seat board and fabric. (54)
• Remove the plastic seat board from the fabric pocket at the TOP of the seat. (55)
• To reassemble the front seat, simply reverse the disassembly steps. Ensure all zippers and straps
are securely closed.
• Reinstall the front seat to the stroller. Refer to section "Removing/Reinstalling the Front Seat."
Removing/Reinstalling the Bench Seat Pad
NOTE: The bench seat pad is removable for washing.
• First, remove the bench seat from the stroller. Refer to section "Removing/Reinstalling the Rear
Bench Seat."
• Detach the 6 elastic loops underneath the bench seat. (56)
10
The maximum weight that can be carried in
DO NOT force the stroller closed. ALWAYS
Publicidad
Tabla de contenido
