Parts And Components; Before Use; Operation - cecotec CUMBIA CAPRICCIOSA WHITE Manual De Instrucciones

ENGLISH

2. PARTS AND COMPONENTS

Fig. 1
1. Main body
2. Power button
3. Coffee brewing switch
4. Water tank cover
5. Water tank
6. Drip tray
7. Drip tray cover
8. Base
9. Filter holder
10. Measuring spoon with tamper

3. BEFORE USE

Note: The first time the machine is used there might be some smell caused by the insulating
materials and the heating elements. This disappears after a few minutes.
Take the product out of the box and remove all packaging material, stickers or labels.
Make sure all the components are included, and if not, contact immediately the official
Technical Support Service of Cecotec.
Using the device for the first time, or after a long period of time
Remove the water tank from the machine, wash it well with cold water (maximum 600 ml) and
put it back in the machine making sure it is fitted in properly.
Make sure the filter holder is closed, and then place a cup on the drip tray.
Press the power button, and wait until the light indicator remains steady.
Take the coffee brewing switch to the coffee position and brew water until the coffee machine
is clean.
Once it is sufficiently clean, take the switch back to the original position to stop brewing water.

4. OPERATION

Fig. 2
Place the machine on a flat and stable surface.
Take out the water tank and fill it up to 600 ml max.
Fig. 3
Place the water tank back in its position.
16