Parts And Components; Before Use - cecotec Cumbia COFFEE 66 SMART Manual De Instrucciones

1. PARTS AND COMPONENTS

Fig. 1
1. Top cover
2. Filter
3. Funnel
4. Control panel
5. Jar lid
6. Jar
7. Jar handle
8. Heating plate
9. Water level indicator
Fig. 2
Control panel
1. Hours setting
2. Minutes setting
3. Descaling
4. STRONG function
5. Daily scheduling
6. ON/OFF

2. BEFORE USE

Take the product out of the box and remove all packaging materials.
Make sure all parts and components are included and in good conditions. If any visible signs of
damage are observed, contact the Technical Support Service immediately.
Place the appliance on a flat, stable surface.
Make sure the device is turned off and plug it to a power supply.
Run 2 brewing cycles (see "Operation" section) without coffee or filters to clean the whole
device before using it for the first time.
3. OPERATION
Fill the jar with fresh water (preferably bottled or filtered water). Open the top cover and pour
the water into the water tank. The number of cups is shown by the water level indicator. Do not
exceed the maximum fill level.
Note: It is not suggested to prepare less than 4 cups.
ENGLISH
COFEE 66 SMART
35