Notes On Trouble Shooting - Rehau RAUTOOL X-PRESS1 Manual De Instrucciones

NOTES ON TROUBLE SHOOTING

Fault
Tool loses oil
The tool does not reach the end pressure
All manuals and user guides at all-guides.com
Remedy
- Do not open the tool and do not remove or damage the tool seal.
- Send the tool immediately to a service center.
- Interrupt the clamping process.
- Keep the reset slide (item no. 2) strained and simultaneously keep the control switch pressed for approx.
10 sec.
- If the fault is not rectified, the tool must be sent to a service center
25