Kit Assembly; Iso Din Head Unit Provision With Pocket - Metra 99-7348B Instrucciones De Instalación

ISO DIN head unit provision with pocket

1. Attach the radio brackets to the
radio trim panel. (Figure A)
2. Attach the pocket to the trim panel/
bracket assembly with the supplied
(4) #8 Phillips truss head screws.
(Figure B)
3. Attach the radio to the trim
panel/bracket/pocket assembly with the
screws supplied with the unit.
(Figure C)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the proper
mating adapters from the Metra and/or
AXXESS.
5. Reassemble dash in reverse order of
disassembly. (Figure D)
(Figure A)
Kit Assembly 99-7348B
4
(Figure B)
(Figure C)
(Figure D)